Napali Kayak Assembly Instruction Manual
5) Remove the foam caps from the skin. Wash and dry the skin. Leave the zippers unzipped when the canopy is to be folded or rolled up. 6) A
CAUTION Paddlesports can be dangerous and physically demanding. The user of this product should understand that participation in paddlesports
ASSEMBLY INSTRUCTIONS Please read these instructions carefully: some changes have been made to the process for assembly of the coaming (steps
8. Attach the second end-unit frame (part 3, with stainless rings) to the stern end of the longitudinal rods by bending the rods around and in
• By pulling outwards and/or upwards with the hand closest to the bow, open the expansion joints as wide as possible. This will usually involv
21. Slide the seat backwards to the middle of the cockpit. 22. Unravel the tensioning webbing (part 12) and lay it alongside the kayak with
33. Insert the rear deck rod (part 5, with blue bands) into the pivot unit on the stern end frame. Rotate the rod 90 degrees to lock in place
41. The short Kevlar compression struts (parts 17) can now be inserted behind the cockpit and forward of the foot rests (Fig 18, Fig 19). These
46. Pull the front flap around the side of the cockpit capturing the front coaming connector (Fig 21). On the end of the front flap there is a
Kommentare zu diesen Handbüchern